Introduction :
1. Working Mode: controlled by PLC module and MCGS touch screen.2.High precision valve: high speed, glue off clean, no glue
drawing, no dropping. 3. Core metering pump specially design for
different material from low to high viscosities. 4. Mix glue A & B
more evenly; no more or no less for agent B.
Tank system technology:
1. Stainless panel vacuum pressure tank which can bear negative
pressure of inner tank .
2. Tank with motor stirrer that prevent the glue from sediment and
keep the potting material in constant temperature.
3 Tank with top/ high /low liquid sensors that ensure alarm warning
when liquid higher or lower the setting level .
4 Tank with vacuum degas (degas time can be set through touch
screen), so the material can be re-feeding through vacuum negative
pressure .
5 Tank with pressure releasing ball valve ; the bottom of tank
reserved back-flow connector and river closure ball valve.
6 Tank with heater which can preheat materials to assure good
flowability .
7 Tank with artificial feeding mouth that can be added glue
appropriately by hand .
8 Tank with silica-dryer which can prevent material especially PU
from crystallization .
D&H Pump technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Valve technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3. Also Suitable for high viscosity glue: 50cps~35000cps.
4 . Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Features and Benefits:
1, A system of metering, mixing and potting.
2, Accurate metering and even mixing helps to avoid possible waste
of glue.
3, Shot size and positioning keep consistent, fast.
4, Good universality makes PGV-501 suitable for applications of
LED, electric and others glue potting needed.
5, Easy to program and operate.
6, Tally function, non-standard mode, primer mode, level alert,
filter mode, liquid display device, preventing backflow device and
other functional device.
Application:
Industry: Capacitor, power supply, transformer, ignition coil,
reverse sensor, circuit board, electronic ballast, other electronic
products and LED products where glue potting demanded.
Glue:
Epoxy, silica gel, AB glue, PU and other glue which need matching
Optional Function:
1, evacuation
2, heating
3, Geared pump & plunger piston pump are available; Customers can
choose to needs.
4, Control-card will be chosen to be added in to program to needs.
